Blog

Viewing posts tagged spiffs

Building ESP8266 Weather station with BME280 (part II)

In a previous post I've described how to build a Weather Station based on ESP8266 chip and various breakout boards you can buy e.g. on Aliexpress. In this post, however I'll share with you how I built a standalone PCB boards containing all the required components.

Arduino Developing with Atom IDE and PlatformIO for AVR and ESP chips

There are many different ways to develop and deploy embedded solutions, one of the most popular ones would be Arduino IDE. But the editor is very simplistic, without handy features such as intellisense, code refactoring and many others. I've used AVR Studio, IAR, even VIM to develop code for AVR/STM microcontrollers.. But they are either designed specifically for that platform or are commercial products. And I love Open Source :)

Building ESP8266 Weather station with BME280 (part I)

Ever since I started playing around with ESP modules I wanted to measure weather conditions in multiple location at home, friends, etc. The best way to achieve that would be to build a station that gathers various environment parameters and publishes them somewhere. That is what I've done. The very first prototype was done using ESP-1 module, DHT-11 humidity sensor and BMP280 breakout board. The station publishes gathered data to a MQTT broker from where it can be further gathered and analysed.

ESP8266 Wheelie Using Mouse Sensor as a camera with Web interface

Wheelie finished